Erlang logo
User's Guide
PDF
Top

Erlang Reference Manual
User's Guide
Version 5.8.4


Expand All
Contract All

Chapters

12 Distributed Erlang

12.1  Distributed Erlang System

A distributed Erlang system consists of a number of Erlang runtime systems communicating with each other. Each such runtime system is called a node. Message passing between processes at different nodes, as well as links and monitors, are transparent when pids are used. Registered names, however, are local to each node. This means the node must be specified as well when sending messages etc. using registered names.

The distribution mechanism is implemented using TCP/IP sockets. How to implement an alternative carrier is described in ERTS User's Guide.

12.2  Nodes

A node is an executing Erlang runtime system which has been given a name, using the command line flag -name (long names) or -sname (short names).

The format of the node name is an atom name@host where name is the name given by the user and host is the full host name if long names are used, or the first part of the host name if short names are used. node() returns the name of the node. Example:

% erl -name dilbert
(dilbert@uab.ericsson.se)1> node().
'dilbert@uab.ericsson.se'
% erl -sname dilbert
(dilbert@uab)1> node().
dilbert@uab
Note

A node with a long node name cannot communicate with a node with a short node name.

12.3  Node Connections

The nodes in a distributed Erlang system are loosely connected. The first time the name of another node is used, for example if spawn(Node,M,F,A) or net_adm:ping(Node) is called, a connection attempt to that node will be made.

Connections are by default transitive. If a node A connects to node B, and node B has a connection to node C, then node A will also try to connect to node C. This feature can be turned off by using the command line flag -connect_all false, see erl(1).

If a node goes down, all connections to that node are removed. Calling erlang:disconnect(Node) will force disconnection of a node.

The list of (visible) nodes currently connected to is returned by nodes().

12.4  epmd

The Erlang Port Mapper Daemon epmd is automatically started at every host where an Erlang node is started. It is responsible for mapping the symbolic node names to machine addresses. See epmd(1).

12.5  Hidden Nodes

In a distributed Erlang system, it is sometimes useful to connect to a node without also connecting to all other nodes. An example could be some kind of O&M functionality used to inspect the status of a system without disturbing it. For this purpose, a hidden node may be used.

A hidden node is a node started with the command line flag -hidden. Connections between hidden nodes and other nodes are not transitive, they must be set up explicitly. Also, hidden nodes does not show up in the list of nodes returned by nodes(). Instead, nodes(hidden) or nodes(connected) must be used. This means, for example, that the hidden node will not be added to the set of nodes that global is keeping track of.

This feature was added in Erlang 5.0/OTP R7.

12.6  C Nodes

A C node is a C program written to act as a hidden node in a distributed Erlang system. The library Erl_Interface contains functions for this purpose. Refer to the documentation for Erl_Interface and Interoperability Tutorial for more information about C nodes.

12.7  Security

Authentication determines which nodes are allowed to communicate with each other. In a network of different Erlang nodes, it is built into the system at the lowest possible level. Each node has its own magic cookie, which is an Erlang atom.

When a nodes tries to connect to another node, the magic cookies are compared. If they do not match, the connected node rejects the connection.

At start-up, a node has a random atom assigned as its magic cookie and the cookie of other nodes is assumed to be nocookie. The first action of the Erlang network authentication server (auth) is then to read a file named $HOME/.erlang.cookie. If the file does not exist, it is created. The UNIX permissions mode of the file is set to octal 400 (read-only by user) and its contents are a random string. An atom Cookie is created from the contents of the file and the cookie of the local node is set to this using erlang:set_cookie(node(), Cookie). This also makes the local node assume that all other nodes have the same cookie Cookie.

Thus, groups of users with identical cookie files get Erlang nodes which can communicate freely and without interference from the magic cookie system. Users who want run nodes on separate file systems must make certain that their cookie files are identical on the different file systems.

For a node Node1 with magic cookie Cookie to be able to connect to, or accept a connection from, another node Node2 with a different cookie DiffCookie, the function erlang:set_cookie(Node2, DiffCookie) must first be called at Node1. Distributed systems with multiple user IDs can be handled in this way.

The default when a connection is established between two nodes, is to immediately connect all other visible nodes as well. This way, there is always a fully connected network. If there are nodes with different cookies, this method might be inappropriate and the command line flag -connect_all false must be set, see erl(1).

The magic cookie of the local node is retrieved by calling erlang:get_cookie().

12.8  Distribution BIFs

Some useful BIFs for distributed programming, see erlang(3) for more information:

erlang:disconnect_node(Node) Forces the disconnection of a node.
erlang:get_cookie() Returns the magic cookie of the current node.
is_alive() Returns trueif the runtime system is a node and can connect to other nodes, falseotherwise.
monitor_node(Node, true|false) Monitor the status of Node. A message{nodedown, Node}is received if the connection to it is lost.
node() Returns the name of the current node. Allowed in guards.
node(Arg) Returns the node where Arg, a pid, reference, or port, is located.
nodes() Returns a list of all visible nodes this node is connected to.
nodes(Arg) Depending on Arg, this function can return a list not only of visible nodes, but also hidden nodes and previously known nodes, etc.
set_cookie(Node, Cookie) Sets the magic cookie used when connecting to Node. If Nodeis the current node, Cookiewill be used when connecting to all new nodes.
spawn[_link|_opt](Node, Fun) Creates a process at a remote node.
spawn[_link|opt](Node, Module, FunctionName, Args) Creates a process at a remote node.
Table 12.1:   Distribution BIFs.

12.9  Distribution Command Line Flags

Examples of command line flags used for distributed programming, see erl(1) for more information:

-connect_all false Only explicit connection set-ups will be used.
-hidden Makes a node into a hidden node.
-name Name Makes a runtime system into a node, using long node names.
-setcookie Cookie Same as calling erlang:set_cookie(node(), Cookie).
-sname Name Makes a runtime system into a node, using short node names.
Table 12.2:   Distribution Command Line Flags.

12.10  Distribution Modules

Examples of modules useful for distributed programming:

In Kernel:

global A global name registration facility.
global_group Grouping nodes to global name registration groups.
net_adm Various Erlang net administration routines.
net_kernel Erlang networking kernel.
Table 12.3:   Kernel Modules Useful For Distribution.

In STDLIB:

slave Start and control of slave nodes.
Table 12.4:   STDLIB Modules Useful For Distribution.